Serene Subaru Magnet

AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects 3mf and stl included

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x150mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA PolyTerra Black Transmission Distance: 0.3 PLA PolyLite Blue Transmission Distance: 1.7 PLA CookieCad Witches Blue Transmission Distance: 4.4 PLA+ IIID Max Teal Transmission Distance: 7 PLA BambuLab Basic Jade White Transmission Distance: 5.7 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #14 (0.68mm) swap to Blue At layer #18 (0.84mm) swap to Witches Blue At layer #23 (1.04mm) swap to Teal At layer #25 (1.12mm) swap to Jade White for the rest.