1 Likes1 DownloadsApril 8, 2024
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 2.6 PLA+ IIID Max Teal Transmission Distance: 7 PLA HP3D Yellow Transmission Distance: 10 PLA PolyLite Magenta Transmission Distance: 1.9 PLA BambuLab Basic Jade White Transmission Distance: 5.7
Swap Instructions: Start with Charcoal Black At layer #12 (0.6mm) swap to Blue Gray At layer #13 (0.64mm) swap to Teal At layer #14 (0.68mm) swap to Yellow At layer #21 (0.96mm) swap to Magenta At layer #22 (1mm) swap to Jade White for the rest.
1 Likes1 DownloadsApril 8, 2024
1 Likes1 DownloadsApril 8, 2024