7 Likes10 DownloadsMarch 23, 2024
AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects
3mf and stl included
Filaments Used: PLA PolyTerra Charcoal Black PLA PolyLite Grey PLA BambuLab Basic Jade White 3D printing settings
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions: Start with Charcoal Black At layer #8 (0.72mm) swap to Grey At layer #16 (1.36mm) swap to Jade White for the rest.
Categories:
7 Likes10 DownloadsMarch 23, 2024
7 Likes10 DownloadsMarch 23, 2024