AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects

3mf and stl included

Filaments Used: PLA PolyTerra Charcoal Black PLA+ Esun Dark Blue PLA PolyLite Purple PLA Polylite Aqua Blue PLA BambuLab Basic Jade White 3D printing settings

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions: Start with Charcoal Black At layer #5 (0.48mm) swap to Dark Blue At layer #8 (0.72mm) swap to Purple At layer #10 (0.88mm) swap to Aqua Blue At layer #15 (1.28mm) swap to Jade White for the rest.