This picture was hand drawn and printed using HueForge. The HueForge snaps into the printable Frame included. Recommended to print the Frame at 100% infill. If you have any questions or need support, feel free to reach out on my new community Discord!
Stl and 3mf file included for both the Frame and the Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 203x152.88mm in size You may print at higher layer heights below the Min Depth of 1.5mm The Max Depth is 3.2mm and the Actual Depth is 3.3mm
Filaments Used: PLA PolyTerra Black Transmission Distance: 0.3 PLA PolyLite Blue Transmission Distance: 1.7 PLA CookieCad Witches Blue Transmission Distance: 4.4 PLA+ IIID Max Teal Transmission Distance: 7 PLA BambuLab Basic Jade White Transmission Distance: 5.7 This print uses 5 unique filaments
Swap Instructions: Start with Black At layer #20 (1.68mm) swap to Blue At layer #22 (1.84mm) swap to Witches Blue At layer #25 (2.08mm) swap to Teal At layer #26 (2.16mm) swap to White for the rest.