AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects

3mf and stl included

Filaments used in example: Polymaker Charcoal Black PLA Esun Dark Blue PLA+ Polylite Magenta Polylite Purple Polylite Natural HP3D Yellow PLA+ 3D printing settings

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

Swap Instructions: Start with Charcoal Black At layer #9 (0.56mm) swap to Dark Blue At layer #15 (0.8mm) swap to Purple At layer #19 (0.96mm) swap to Magenta At layer #25 (1.2mm) swap to Yellow At layer #40 (1.8mm) swap to Natural for the rest.