Cherry Blossom RX7 Magnet

AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects

3mf and stl included

Filaments used in example: Polymaker Charcoal Black PLA Bambu Labs White PLA Basic HP3D Red PLA+ HP3D Yellow PLA+ 3D printing settings

Swap Instructions:

Print with 100% infill, base layer height 0.16mm, layer height 0.8mm.

Start with Charcoal Black At layer #10 (0.88mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #15 (1.28mm) swap to Jade White for the rest.