NaturalVectors
NaturalVectors1K followers
Follow
NaturalVectors
NaturalVectors
|
Image 1 of 3
Planter Pot Ramen with Rounded Base 3d model
NaturalVectors
NaturalVectors
|
Image 1 of 3
Planter Pot Ramen with Rounded Base 3d model
Planter Pot Ramen with Rounded Base 3d model
Planter Pot Ramen with Rounded Base 3d model
Planter Pot Ramen with Rounded Base 3d model

Planter Pot Ramen with Rounded Base

Subscribe for access starting at $10 USD
Get access to this model and 32+ more
This model is restricted by licensing terms. 

This ramen pattern inspired pot infuses the traditional feel of a ramen bowl with contemporary appeal. It stands 5 inches high, boasting a 6.6 inch diameter at the top, providing ample space for a variety of plants. With its unique design, this model is versatile, fitting in effortlessly with any interior or exterior decor.

  • Height - 5 inches
  • Diameter - 6.6 inches
  • Supports recommended at the base.
Community Makes (1)
Make a change to the tray so the pot didn't slide off too easily.  The main dark color was PLA Wood and I think I didn't dry it enough since you can see some issues with the under or over extrusion.
Make a change to the tray so the pot didn't slide off too easily.  The main dark color was PLA Wood and I think I didn't dry it enough since you can see some issues with the under or over extrusion.


Community Makes (1)
Make a change to the tray so the pot didn't slide off too easily.  The main dark color was PLA Wood and I think I didn't dry it enough since you can see some issues with the under or over extrusion.
Make a change to the tray so the pot didn't slide off too easily.  The main dark color was PLA Wood and I think I didn't dry it enough since you can see some issues with the under or over extrusion.

Discussions
David F
fink3d
Make a change to the tray so the pot didn't slide off too easily. The main dark color was PLA Wood and I think I didn't dry it enough since you can see some issues with the under or over extrusion.
Make a change to the tray so the pot didn't slide off too easily.  The main dark color was PLA Wood and I think I didn't dry it enough since you can see some issues with the under or over extrusion. 3d model
 3d model
PrinterBambu Lab P1S
Print bed sizeX: 250 mm; Y: 250 mm; Z: 250 mm
MaterialPLA
Layer height0.2 mm
Infill density15 %
David F
fink3d

While this pot looks fabulous, the base on this item does not really "fit" into the pot. The pot can be easily knocked off the base. It would be great if either the base was bigger so it could hug the curve on the bottom or maybe something raised from the bottom that would go into the center hole in the base of the pot. I added 5 small cones to the bottom of the tray to help keep it in line.

Planter Pot Ramen with Rounded Base

15 downloads · 2 years ago in  and 
NaturalVectors
NaturalVectors1K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 32+ more
This model is restricted by licensing terms.