This is a functional, FDM 3D printer-ready mason beehive.
There are options for 6mm, 8mm, and 10mm tubes, but mason bees often prefer the 8mm design.
The roof, straps, bottom, and hang should be printed with 4 or 5 perimeter walls and about 20% infill. The other parts are good with 3 or 4 perimeters at 10% infill.
The hanger has two options included. One is for use with a #10 wood screw, the second is for use with a 1/4" (6mm) lag screw and washer.
Category:
6 Likes17 DownloadsApril 21, 2023
6 Likes17 DownloadsApril 21, 2023