First add-on pack 01 for Modular Plant Support System, 9 New parts to print to personalize your plant support.

Parts F are alternative end to the base kit and come in 3 size 100mm, 130mm, 160mm if you do not like ornament and want something minimalistic.

Part G to J are four parts that will allow you to connect different width from the base kit. G and H will increase the width of the assembly, I and J will decrease it(see third picture).

Part K is a cap with a mortise to cover any exposed tenon.

Part L is a new ornament shaped like a five-pointed star.

Tenon and mortise are test pieces to test the fit and tolerance of your printer and adjust your setting. Tolerance of the assembly is .125mm and will be tight the first few time.

Create your own part A and B are provided to allow and encourage you to create new parts that will fit the system. parts that could be fun to make are different type of "Y" piece, “zig-zag”, squiggly line, lightning, other shape ornament  and letters

Add-on pack 01 for Modular Plant Support System

F-100-Alt End.STL

An elegant and fun Modular Plant Support System, printed with minimum support and assembled with tenon and mortise.

The base kit Modular Plant Support System consist of a stake “A”, a starting piece "B", a middle piece "C", an end piece “D” and a heart shaped ornamental part "E". To lengthen the support Part "C" can be printed multiple time.

There are three width to choose from 100mm, 130mm, 160mm. The height for each width is 48mm, 60mm and 72mm

I highly recommended printing the two part test print to check your printing setting. the tolerance of the assembly is .125 mm. the first few time the joinery will be tight.

Parts are printed on the side and need a little support for the tenon, grid pattern worked best in my case. The file “Complete 100” is how I nested the whole 100mm model on my printer

The “Create your own part A and B” part are .step that can be use to create your own additional parts, new ornemental piece ,etc…

Later, I will provide an add-on pack with a new end part that remove the ornemental piece, several parts which connect the different width, and a new ornemental part.

I hope you will appreciate my work and I'm eager to see what you will create.

Modular Plant Support System (base kit)

A-Stake.STL

Introducing my 3D Printed version of Double-Sided Paracord Knitting Spools in 4-Pin, 6-Pin, and 8-Pin configurations. These spools feature symmetrical removable pins that apply gentle tension to the paracord, resulting in a flawlessly uniform weave. Whether your choice is Nano, Micro, Type II, or Type III Paracord, simply select the appropriate spool size for your needs and enjoy effortless paracord weaving.

The “small” model has a 4-pin and a 6-pin configuration for Micro and Nano Paracord. Outside Ø38mm - Inside Ø22mm

The “medium” has a 6-pin and a 8-pin configuration for Medium Sized Paracord - #275 and #325. Outside Ø54mm - Inside Ø35mm

The “large” has a 6-pin and a 8-pin configuration for Type III - #550 Paracord. Outside Ø60mm - Inside Ø42mm

The pin holes are 3mm diameter and can be use with cotter/split pin too.

All models feature a decorative weaving pattern, are 75 mm tall, and can be print without support. I printed mine with 3 walls, 0.2mm layer, and two filaments change.

Happy printing.

A video tutorial of what you could do with the knitting spool.
[https://youtu.be/gnyTm1idk-k](url)

Paracord Knitting Spool

001-Small Paracord Knitting Spool.STL

I had to replace the pull start handle of my grass trimmer, but can be use everywhere such handle is needed.

It is modelled to use the minimum amount of support. 

Just lay it down on a face, use tree support for the ceiling of the holes at each ends. Use 3 walls and plenty of infill to keep it solid.

I included a STL version with no writing.

Pull Start rope Handle

Pull Start Handle.STL

For coffee lover, give your pencils a nice cup of joe.

A two parts pen holder that looks like a coffee mug. Inspire by my penholder “C” but in reverse as part B slide from underneath into part A and you hold it like a cup of hot beverage. the wedge and cylinder hold the assembly together.

Part A could be divide with additional modules

Print it in vase mode and don't drink from it. Enjoy.

Pen holder Cup

002-Pen Cup A.STL

Fun and functional two parts pen holder.

A two parts pen holder. Part A is your main pen cup, parts B is taper down and out and will slide down perfectly into part A.

There is still place to divide the main part in two with additional container.

Print in vase mode. Enjoy.

Pen holder "C"

001-Pen Holder A.STL

A penholder for people who like puzzles.

The starting point of my “Three petal twist” penholder, I then came back to it to refine it.

Don't look to close, those lines are mesmerizing.

Print like any other vase mode print.

Pen Holder-Puzzle

Hold your pencils in a flower.
Offices can be dull and cold. Bring a little bit of lightness and warmth to your office with this penholder printed in vase mode. the lines open nicely to mimics a flower opening.

Print it as any other vase mode print. Enjoy.

Pen Holder-Three Petals Twist

A sequence planter and watering tray combo.
A can be use to hide your flower pot or use it directly as a planter. Design of the planter will flow seamlessly into the tray
Inside volume is h 130mm x Ø130mm
outside Ø 166mm
Walls are 1.6 mm and printed with 100% infill  4 perimeters , took 12 hours + so it can be tweak.
.2 layers and 0 support

#PLANTERSXCULTS


Sequence planter and tray

Sequence-Planter.STL

A vase that look like a cob of corn.

Printed in vase mode, blue green silk filament, .4 nozzle and .2mm layer.

Dim. inside Ø67mm, height 176mm

Corn Cob Vase

It looks like a stack of off road tire.

I made this low poly vase in vase mode to fit a collins glass to put fresh flowers in.

Printed in black PLA .2 layer in vase mode.

Triangle geometry is inverted compared to the previous one

Dim. 180mm high, Ø80mm at its largest, inside Ø64mm

Low poly Vase "off road tire"

Low poly Vase for dry flowers or fresh ones with waterproof insert.


I made this low poly vase in vase mode to fit a collins glass to put fresh flowers in.

Printed in silk PLA green/purple .2 layer in vase mode

Dim. 180mm high, Ø80mm at is largest, inside Ø64mm

Low poly Vase

Triangle.STL

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Nalrod

Achievements

Seedling

Debutant

Explorer