Threaded Cigarette Holder
31 downloads · 4 years ago · Will Hold a single "Cigarette" with threaded Cap
My Print Settings
.12mm Layer Height
30% infill
Will Hold a single "Cigarette" with threaded Cap My Print Settings .12mm Layer Height 30% infill (The more infill the less chance you'll be able to smell anything inside it, but 30-45% seems to be a decent place for my printer) No supports needed
Havent tested it yet but if scaled up to 130-135% you should be able to fit a "Cigarillo" in there... ;)
Gridfinity 1x3 Atomizer Holder
Bobbin and Thread holder v2.step
Crocs compatible cigarette box holder
Cigarette Dice Holder and Ash Tray
Gridfinity Metric and SAE thread checker holders
38mm Thread Die Holder
Serger Thread Spool Holder and Guide Hooks
Threaded paper towel holder
Gridfinity Ritza Tiger Thread Spool Holder
Thread Spool Holder Gridfinity
Multiboard Peg Standard Large Thread Spool Holder (For Sewing)
Gridfinity 1x1 Thread Tap Holder
Cigarette Pack Desiccant Holder
Gridfinity 1x3 holder for thickness and thread gauge.
Small Thread Fork - Screwdriver Holder for Multiboard.stl
1.75" Small Thread Multiboard Challenge Coin Holder
50 mm Small Thread Multiboard Challenge Coin Holder
38 mm Small Thread Multiboard Challenge Coin Holder
Multiboard DeWalt Bit Holder: 10 mm Mid Thread, Dovetail Cut Head, T-Bolt
.png&w=3840&q=75)
The best "Cigarette" Holder. I printed it ridiculous dense at 100% infill and at 135% in sice. A bit too big, but i like it. I coated the Threads in Candle wax to lube them. It worked perfectly. Thanks for your work. Pro Tip: use a rubber circle as a gasket in the Cap to waterproof it. 😎