The project files are organized into folders for easier printing and navigation. For that reason, stl file preview is turned off.

This is a 3d printable fan art representation of the Witch king mace.

The mace is a very large and heavy weapon so I did my best to make it work entirely with 3d printing :) In order for that to work I just had to do a minor chain design change, but they are still pretty close :)

The grip part has a slot for aluminum rod/ wood insert for structural strength.

Chains are fully printed in place, but due to them being so large and thick only 3 pieces will need some minor support. To make that part easier I added a pre-supported version as well.

It was designed so the chain can be replaced at any time if needed, or if you want, you can use a real chain :)

The heavy Mace part is designed in a way to keep the large size but it is 4mm thick, so it's hollow inside so it won't be too heavy to use :)

The files are made with extra care and 3d printability in mind, so its a fairly simple print and assembly. Chain print in place video: https://www.instagram.com/p/C2djwrxKrsJ/

Join our community and find out more at: https://www.facebook.com/groups/3282336185171090

or follow me on instagram: https://www.instagram.com/mysterymakers_3d/

If you like this model please consider joining my patreon. Lots of models each month and many rewards

https://www.patreon.com/mysterymakers