The project files are organized into folders for easier printing and navigation. For that reason, stl file preview is turned off.
This is a 3d printable fan art representation of the Sword of a Witch king.
I did my best to recreated the ornament details, and as always i added some little extras:
1 - both textured and clean grips ( if you wish to use real leather) 2 - pre-sliced blade with mounting pins and 80 x 1250 mm rod/wood/dowel insert - same as on some of my previous projects like the power sword. Such a design has been tested and the aluminum inserts look fantastic :) 3 - a small scale textured version for resin printing, if you wish to make a smaller prop :) For that one I also included a small desk stand so you can use it as a mini display piece :)
If you don't have the 8mm aluminum insert or don't want to use a metal/wood insert, you can use the 8x8 pin that will help you align the parts and glue them
I do have to mention there is a slight design sacrifice - the upper portion of the blade is a tiiiny bit thicker than the real prop as the narrow/thin one would be unprintable so i had to make it a bit thicker so it can print without problems and also fit the 8mm insert for structural strength.
The files are made with extra care and 3d printability in mind, so its a fairly simple print and assembly.
Join our community and find out more at: https://www.facebook.com/groups/3282336185171090
or follow me on instagram: https://www.instagram.com/mysterymakers_3d/
If you like this model please consider joining my patreon. Lots of models each month and many rewards