The project files are organized into folders for easier printing and navigation. For that reason, stl file preview is turned off.
This is a fan art representation and a 3d printable stl files diy kit inspired by Thor as seen in the Thor and Love and thunder movies. This is not an officially licenced product and has not relation to marvel, disney etc, it is a personal interpretation and a guide to help you build your own diy projects.
ABOUT THE PROJECT
Scale inspired by the officially used prop.
Included are:
-
Regular Mjolnir - I created the body so its easy to print without supports, and added structural strength. There is a 10mm dovel intended for the hilt, and 8x8 pins or magnets to be used at your own discretion depending on what you would like more :)
-
Love and thunder Mjolnir ( both damaged and with holes for lights) - once again 8x8 pins or magnets - i recommend you close one side with pins and leave the other one to be used with magnets so you can access the electronics. IF you don't wish to use any lights on the inside, just print the damaged one "without holes"
-
regular and L&T for small scale resin printing - yup 1:6 scale made for resin printing. The opening on the hilt for the strap is still there, so if you can find some small straps you will get yourself some nice keychains :)
-
desk stands - 3 versions
-
Join our community and find out more at: https://www.facebook.com/groups/3282336185171090
or follow me on instagram: https://www.instagram.com/mysterymakers_3d/
If you like this model please consider joining my patreon. Lots of models each month and many rewards