The project files are organized into folders for easier printing and navigation. For that reason, stl file preview is turned off.

he Barry Allen's ring is finally here 🙂

You've seen the functional prototype but here's the real deal now 🙂

While i was making it the inside "chamber" where the suit is, looked like it could be a cool ring as well, so I went and made a little "fidget" ring , so you have an "extra" ring in the "pack" 🙂

To recap, included are:

1 - functional finger ring (with damaged or non damaged parts)

2 - non functional finger ring (with damaged or non damaged parts)

3 - ring 2 (fidget ring)

I also included a suggested parts orientation for the functional ring, keep in mind to slow down the speed a bit and use 0.1 mm layer height.

Suggested nozzle is 0.4 mm (that's the only real limit of the print if you wish to keep it at 100% - for the functional part only), but you might get away with 0.5 as well 🙂

I've also provided little animation for the functionality of the ring, those were fun to make.

Join our community and find out more at: https://www.facebook.com/groups/3282336185171090

or follow me on instagram: https://www.instagram.com/mysterymakers_3d/

If you like this model please consider joining my patreon. Lots of models each month and many rewards

https://www.patreon.com/mysterymakers