This Snap enables you to insert an M3 nut mid-print, allowing you to attach accessories that use a screw.
Printing Guidelines:
While slicing at a layer height of 0.2mm, drop in the nut by pausing the print between layers 38 - 40 (once it reaches layer 41 it will start to bridge over that slot). Always triple-check check the nut is short enough to fit in.
This is a "print at your own risk" file. If you feel uncomfortable, it's best not to do it. We do not hold any responsibility if you break your 3d printer by putting a nut in too early or too long for the nut slot.
Apart from that, default printing guidelines apply: The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
—
This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.
Explore and build the coolest, most adaptable workshop at https://multiboard.io