3x4H - Bottom Holes - Multibin Drawer Faceplate

Faceplates are used to create "Multibin Drawers". They connect to Faceplates by sliding on and secure using "Faceplate-To-Base Clips".

This Faceplate only has Clip Holes at the bottom.

If you use "Accessory" Clips, then you can attach a Handle to the Faceplate.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, click here.

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io