.jpg&w=3840&q=85)
.jpg&w=256&q=75)
Multiboard Demo Pack (FREE)
33K downloads · 11 months ago · The Multiboard Demo Pack is a free pack that will show you the flexibility and magic of Multiboard w
This model is restricted by licensing terms.
View license.
The Multiboard Demo Pack is a free pack that will show you the flexibility and magic of Multiboard with the least amount of parts.
Watch the video tutorial: https://www.youtube.com/watch?v=5ujBraWJPVI
Printing Guidelines
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings. It's designed for 0.4 mm Nozzle Size.
What's Multiboard?
Multiboard is a ridiculously modular building system that lets you create anything from storage walls, bin systems, or any project you can think of.
Multiboard already has over 2.7 million total downloads, and tens of thousands of active community members who are using Multiboard almost everywhere.
Learn more at multiboard.io
Multiboard Demo Pack (FREE)
33K downloads · 11 months ago in and
This model is restricted by licensing terms.
View license.
Fix Point to Countersink Adapter
Flush - Small Hole Center Marking Tool
6.25 Offset - Small Hole Center Marking Tool
12.5 Offset - Small Hole Center Marking Tool
2x6 MU - Right Support End - Modular Bolt-Locked Shelf
4x8 MU - Center - Modular Bolt-Locked Shelf
2x2 MU - Right Support End - Modular Bolt-Locked Shelf
2x6 MU - Left Support End - Modular Bolt-Locked Shelf
8x8 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Right Support End - Modular Bolt-Locked Shelf
4x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Left Support End - Modular Bolt-Locked Shelf
2x2 MU - Left Support End - Modular Bolt-Locked Shelf
8x2 MU - Center - Modular Bolt-Locked Shelf
8x4 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Right Support End - Modular Bolt-Locked Shelf
8x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Center Support - Modular Bolt-Locked Shelf
Not sure why my message didn't post with it! BUT! Wanted to try the demo before committing a lot of filament, and have to say, she's great! Sturdy and full of potential. Can't wait to use it for my tools and in my classroom.
I think you should add in a screwdriver for the screws - who carries money any more?
Should this be printed in PLA or PETG?
Either will work. You can use PLA for inside of your house, or PETG for your garage, or anywhere it can get pretty hot.
Missing pegboard hook?
Sorry about that. Just tweaked it to make sure it's in there. Thank you for pointing it out.
Doesn’t include stl files?