MP Bolt-Locked Insert - Flex-On Rail Slider
Rail Sliders can slide on a Multipoint Rail. "Flex-On" Sliders can be added to a Rail from anywhere (not just from the sides) by flexing the bottom lip, flex on sliders aren't as strong as regular sliders.
Learn more about this part at https://multiboard.io/knowledge-hub
Printing Guidelines:
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.
The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
For more information about printer settings, click here.
This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io
MP Bolt-Locked Insert - Flex-On Rail Slider
Fix Point to Countersink Adapter
Flush - Small Hole Center Marking Tool
6.25 Offset - Small Hole Center Marking Tool
12.5 Offset - Small Hole Center Marking Tool
2x6 MU - Right Support End - Modular Bolt-Locked Shelf
4x8 MU - Center - Modular Bolt-Locked Shelf
2x2 MU - Right Support End - Modular Bolt-Locked Shelf
2x6 MU - Left Support End - Modular Bolt-Locked Shelf
8x8 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Right Support End - Modular Bolt-Locked Shelf
4x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Left Support End - Modular Bolt-Locked Shelf
2x2 MU - Left Support End - Modular Bolt-Locked Shelf
8x2 MU - Center - Modular Bolt-Locked Shelf
8x4 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Right Support End - Modular Bolt-Locked Shelf
8x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Center Support - Modular Bolt-Locked Shelf
I would be grateful for a pointer/advice as to which bolt locks this to a snap. I can't find any bolt that fits this size of hole. Can I use the Bolt Generator to produce one? If so, what size do I need? Thank you in advance.
It's REALLY unclear unless you watch the multipoint video, but I think the part you want is here (at least this worked for me):
https://thangs.com/designer/Multiboard/3d-model/Small%20Thread%20-%20Multipoint-1123334
https://beta.multiboard.io/multipoints?Type=Small+Thread
Have a great day!
The small thread is too small for this bolt lock. I think the connector here is actually the friction fit size and needs to be adjusted. Printed on A1 Bambu Lab printer.