A direct-to-wall mount for storing the Dbrand Joy-Lock — screws into the wall via two integrated fixing points. Both storage scenarios in one pack: a bare Joy-Lock cradle and a Joy-Lock + Joy-Cons cradle. Print whichever fits how you actually leave the controller.

What's in the pack

1 × STL files: bare Joy-Lock holder 1 × 3MF with my Bambu Lab profile baked in (PLA, 0.2 mm, minimal supports)

Print notes

Print back-face down on the bed (default in the 3MF) 25% infill recommended — the mount holds the Joy-Lock's full weight 4 perimeters around the screw eyelets for strength PETG is a worthwhile upgrade if the mount will be in direct sunlight

Hardware you'll need

2 × short wood screws (16–25 mm) Wall plugs if not screwing into a stud A drill / driver

Compatibility

Dbrand Joy-Lock — bare or with Joy-Cons attached Designed for direct wall mounting (use my T5 Pegboard Mount listing for IKEA SKÅDIS / UPPSPEL setups)

License

CC BY-NC-ND 4.0 — personal-use printing only, no commercial reselling of prints, no STL redistribution or modification. Credit MuchaLabs in any posts.

Tested on Bambu Lab P1S, X1C, and Prusa MK4.

🧡 Designed and printed by MuchaLabs 📩 Have a custom request? Just drop a message!

Don't have a 3D printer? Order printed and shipped from Etsy: muchalabs.etsy.com