📜 Licensing These designs are intended for personal use only. If you'd like to sell physical prints, please support my work by purchasing a commercial license with a Thangs Membership or Patreon Membership

☕ Designs Included

• Coffee • Macaron • Muffin • Coffee (Smiley Face) • Macaron (Smiley Face) • Muffin (Smiley Face)

ℹ️ Clicker

• This design requires a mechanical keyboard switch to function. Most MX-compatible switch will fit without modification

• Keychain and regular versions included

• Keychain version has small and large hole options Small - rings & bead chains Large - lobster & carabiner clasps

• Includes pre-colored 3MF & STL files

🛠 Print Settings

• Nozzle Size: 0.4mm • Layer Height: 0.2 mm or less • Wall Count: 2-3 walls • Infill: 10% - 15% Gyroid

• SUPPORTS REQUIRED normal(manual) - painted on the underside of the caps

👷‍♂️ Assembly

• Remove the support from under the cap. • Align the switch with the square hole in the base and press it down into place. Press the cap onto the clicker

🎨 Filaments Used

Coffee • Polymaker Matte PLA – Wood Brown (Cardboard) • Polymaker Matte PLA – Earth Brown (Lid) • Overture Matte PLA – White (Cup) • Overture Matte PLA – Black (Face)

Macaron • Overture Matte PLA – White (Filling) • Polymaker Matte PLA – Pastel Ice (Macaron) • Polymaker Matte PLA – Sakura Pink (Macaron) • Overture Matte PLA – Black (Face)

Muffin • Bambu Matte PLA – Sky Blue (Liner) • Polymaker Matte PLA – Sakura Pink (Liner) • Polymaker Matte PLA – Peach (Muffin) • Polymaker Matte PLA – Earth Brown (Choc Chips) • Overture Matte PLA – Black (Face)