Voron 0.1 Hardware Organizer
2.3K downloads · 5 years ago · I recently started building my Voron 0.1 and one of the most frustrating aspects was the poorly labe
This model is restricted by licensing terms.Â
View license.
I recently started building my Voron 0.1 and one of the most frustrating aspects was the poorly labeled bags the hardware came in. Decided to make a small hardware organizer for the 0.1.
There are 20 drawers for the 20 items listed under hardware in the BOM. There is a tiny slot for magnets (the same one used for the V0.1) that can be glued into the roof allowing you to have a small place to set a screw while working.
Was very happy with the end design and wanted to share for anyone else that may be interested.
Voron 0.1 Hardware Organizer
2.3K downloads · 5 years ago in  andÂ
This model is restricted by licensing terms.Â
View license.
Screwfinity Unit 2U Medium WIDE - The Gridfinity Storage Unit
Flagfinity - Screwfinity Unit 2U America Edition - The Gridfinity Storage Unit
Voron Hardware Organizer EXTENDED REMIX
Hardware Organizer drawer with slope
Voron 0.1 Mini-Afterburner Cowling Logo
Tool Chest Small Hardware Organizer
M2 T-Nut - use for Voron 0.1 Makerbeam XL 1515 Extrusion
Voron 0.1 XY joint cracking fix
Voron 0.1 Magnetic Bed Guides
Various Hardware Organizer Boxes
Voron 0.1 Tophat Riser
Voron 0.1 Cable & Bowden Strain Relief
Voron 0.1 with MAB Dial Indicator Mount
Bundle
Mini Hardware Boxes - Print in Place, Organize your nuts and bolts
Voron Hex Mid Panel - Accent your 0.2!
EOS | Espresso Organizer System - Spoon Holder.stl
EOS | Espresso Organizer System - Distributor Holder.stl
EOS | Espresso Organizer System - 58mm Basket Holder
EOS | Espresso Organizer System - Normcore Tamper Holder
For those wondering - I found the best print orientation to be with the back facing down against the build plate.
What is the print orientation for the drawers? Also, can we get the CAD file to edit? Love the Voron logo on the side but removing it to print faster would be a great option.
You should find a step file in the downloads. The drawers prints nice on its bottom.
Slightly updated drawer with a slope to make it easier to get smaller items out. https://social.thangs.com/m/51669
Printed without supports took about 20 hours for the whole thing including all 20 drawers.
Hi, do you print it bottom up ? or you use support (if you print it bottom down)
im printing it vertically, we shall see how it goes lol. feel free to check with me on sunday. it should be done then
nice design, thanks for your time and keep up the great videos