Key Conector 2.stl
0 downloads · 3 years ago · End Connectors:
These are used to connect the modules on the ends for added stability.
I have added
End Connectors: These are used to connect the modules on the ends for added stability. I have added connectors for the front and back ranging from 2 - 4 module units.
Instructions for Printing: Raft = no Brim = optional but not needed Wall Loops/Top and Bottom shells = 2 - 4 (personally i like 4 for extra stability) Layer Height = 0.2 mm Speed = Default Temperature = Default for your material of choice
During testing I used the Bambu Labs x1 Carbon with PolyLight PLA and left most settings in the Bambu Studio as default with any changes listed above so your print times may vary.
2 key slots: Material = roughly 27 grams Time = 54 minutes Material and time includes the Bambu X1 Carbon prep time and flow lines
Hole Conector 4.stl
Arduino Module Peg.stl
Arduino Module Mega.stl
Arduino Module Uno.stl
Arduino Module Tray x 4.stl
Arduino Module Tray x 1.stl
Arduino Module Tray x 2.stl
Arduino Module Tray x 3.stl
Arduino Module Bread Board.stl
Arduino Module Mini Bread Board.stl
Key Conector 4.stl
Key Conector 3.stl
Hole Conector 2.stl
Hole Conector 3.stl
Vesp 2.stl
Ironing Stack - Test Print - Key Chain
Break Action Shotgun Keychain — Functional Blaster Toy
PS5 Controller Pillow
.png&w=3840&q=75)
Lara Lamp
