Intel Pro 1000 4 Port Full Height Bracket

Short Story Time. Had this card with a low profile bracket....didn't want to buy a full length bracket.

The PCI-E Bracket is for the Intel Pro/1000 4 Port Ethernet card

This bracket is strong enough to plug and pull. Printing with PLA is fine, if you print in another material let me know please, would love to hear the results.

Instructions to print

You must generate supports! If you are using Cura I recommend setting your print settings to advanced. Support structure must be Tree Touching build plate The rest of the settings are up to you Supports (default worked for me) infill was set to 20% but that is only a recommendation* Let me and everyone know if any settings have better results.

The hole is for a M3 insert. It is not entirely necessary to be screwed in but recommended