TowerMaze Level 38

Back again with some more TowerMazes. We are closing in to the end of the era here - TowerMaze level 1 to Level 40 already available on Thangs page and just 10 more levels and the Mega maze remaining to close TowerMaze series!

This is your chance to test one of them for free - Level 36 now available for free for just a limited time! If you want to get a batch of levels 41 to level 45 completely for free, make sure to download, like, add to the collection and add a “make” to this design page once you have printed it! If we reach 100 Makes, I will be uploading TowerMaze batch level 41 to Level 45 completely for free forever! Furthermore, if you join Mazetropolis Facebook community and post your “make” in the comments of today’s post, you will be participating in the giveaway of Bambu Lab gift card!

Get the level 36 for free here: https://than.gs/m/1116421

Get sneak peaks, be a part of the community and join in contests and giveaways - Join Mazetropolis Facebook community!

As always - if you have printed one of the previous levels (level 25 to level 40) the case for level 37 will fit so you don’t have to print it again (unless you want to do so)!

TowerMaze level 38 has a built-in one-way closing path that lets you reset the maze without having a need to solve it in reverse.

TowerMaze level 1 up to level 40 are available on my profile.

Dimensions and print specifications for TowerMaze level 38:

Dimensions for the maze: Height = 17.9 cm (7.05 Inches) | Diameter of 7.9 cm (3.11 inches) Dimensions for the case: Height = 16.7 cm (6.58 Inches) | Diameter of 8.1 cm (3.19 inches)

Print time for TowerMaze level 38: 4 hours and 3 minutes Material used for TowerMaze level 38: 39 meters / 116.30 grams

Print time for case for TowerMaze level 38: 4 hours and 47 minutes Material used for case for TowerMaze level 38: 49.11 meters / 146.50 grams

Printing at the same time:

Total print time for TowerMaze level 38 + case: 8 Hours and 44 minutes Total material used for TowerMaze level 38 and case: 88.10 meters / 262.70 grams

Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s