Tower Maze Level 17 - With one way straight closing path

Next addition to the already popular Tower Maze - this time level 17! After testing last version with different materials, it turned out that sometimes the pin in level 16 broke so I improved the design so that this error is eliminated. There is a ONE way path that leads all the way from the top of the maze to the starting point. It enables you to close the maze without the need to solve it - put a gift in the middle, use the single way path to easily close the maze - have the maze solved in the intended way!

This design still requires no supports.

Important: Tower maze case for levels 11 - level 16 is the same as for level 17 so if you have one printed already from previous levels, you don’t need to print an additional one (unless you want to).

Printing specifications:

The maze:

Print Dimensions: Height = 11.7 cm (4.60 Inches) | Diameter of 5.4 cm (2.13 inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 2 hours and 5 Minutes Amount of material required: ~ 16 m (47.5 grams)

Maze case:

Print Dimensions: Height = 11.4 cm (4.49 Inches) | Diameter of 5.4 cm (2.13 inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 2 hours and 24 Minutes Amount of material required: ~ 19.3 m (58 grams)

TOTAL PRINT TIME: 4 Hours and 29 Minutes TOTAL PRINT MATERIAL: ~ 35.3 m (105.5 grams)