TNT-Thrills: Game changing controller display with a Secret battery organizer
byMazetropolisIntroducing the unique Gaming Console Controller Holder and Battery Organizer, designed to level up your gaming setup! This cool cube-shaped stand features a TNT theme, with "TNT" written on the sides and a TNT box trigger pull on top. It's not just a stylish decor accessory but also a functional solution for your gaming needs. The cube is 10 cm (3.94 inches) on each side, with a trigger part extending 12.5 cm (4.92 inches) above, making the total height 22.5 cm (8.86 inches). Lift the TNT box to reveal a hidden compartment that can neatly store up to 12 AA batteries – perfect for keeping your gaming essentials organized. Showcase your Xbox or PS5 controller on the stand and add a touch of creativity to your gaming space. Get ready for a blast of fun and functionality with our TNT-themed gaming accessory!
**PRINTING SPECIFICATIONS: **
Bottom part:
Print Dimensions: Height = 3.1 cm (1.22 Inches) | Base = 9.2 cm x 9.2 cm (3.62 Inches x 3.62 Inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 1 hours and 39 Minutes Amount of material required: ~ 19 m
Top Part:
Print Dimensions: Height = 10 cm (3.94 Inches) | Base = 10 cm x 10 cm (3.94 Inches x 3.94 Inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 4 hours and 22 Minutes Amount of material required: ~52 m
Connector Beam:
Print Dimensions: Height = 7 cm (2.76 Inches) | Diameter = 2.5 cm (0.98 Inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 56 Minutes Amount of material required: ~3.75 m
Controller Holder part:
Print Dimensions: Height = 7.5 cm (2.95 Inches) | Base = 12.3 cm x 7.8 cm (4.48 Inches x 3.07 Inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 1 hour and 17 Minutes Amount of material required: ~11 m
4x TNT letters:
Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 24 Minutes Amount of material required: ~2.8 m
TOTAL PRINT TIME: 8 Hours and 38 Minutes TOTAL PRINT MATERIAL: ~ 88.5 m