Column shaped coaster holder with irregular circle coaster.
DESIGN SPECIFICATIONS:
Irregular shape coaster 4X:
Print Dimensions: Height = 0.36 cm (0.14 Inches) | Diameter = 9.5 cm (3.74 Inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 1 hours and 58 Minutes Amount of material required: ~ 14.5 m
Column Coaster Holder:
Print Dimensions: Height = 3 cm (1.18 Inches) | Diameter = 11.2 cm (4.41 Inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 1 hours and 37 Minutes Amount of material required: ~ 14.2 m
TOTAL PRINT TIME: 3 Hours and 35 Minutes TOTAL PRINT MATERIAL: ~ 28.7 m
.png&w=3840&q=75)
