M3D Jack-O-Lantern (Light Diffuser)

Hello everyone! This is the Light Diffuser that goes into the Main Body. Insert from either front or back cavity and secure with glue (or don't!). No supports necessary. Part is asymmetrical on purpose - don't mirror in slicer for other side. Just print the same part twice and insert into body. Set line width at 0.50mm and layer height to 0.25mm for best results as part is designed around those parameters. Works best when printed in either white or yellow filament. Designed using Fusion360 | M3D Designs - 2020 | TAGS: #halloween #thanksgiving #thanks-giving #jackolantern #jack-o-lantern #pumpkin #m3d #pdo