Pill Dispenser | Fridge Magnet | Pokemon
Keep your daily pills, vitamins, or even candies organized and always within reach with this dispenser. π Featuring 14 compartments and a simple push-button mechanism, the center section rotates with each press and releases a single item from the bottom. π
- Dimensions: Γ120 mm Γ 32 mm π
- Fully printable design, including the spring (Spring can be printed from standard PLA)
- Attach using integrated magnets π§²
- Inside 01_Center there are 4 holes (Γ7.5 Γ 3.5 mm) designed for magnets.
- You can use any magnets that fit within these dimensions. I personally used 6Γ3 mm magnets, but smaller sizes will work as well.
- To insert the magnets into the print, you must pause the print at layer 20. This is already configured in the included 3MF file for Bambu Lab printers.
- Or mount it with double-sided adhesive tape wherever needed
Assembly Notes
- It is important to correctly orient 05_Button during assembly.
- The correct orientation is shown in the reference image included with the model.







.png&w=3840&q=75)






.png&w=3840&q=75)

.png&w=3840&q=75)









Fun idea and a fun way to deliver pills but if you want to use it as a daily medicine box, there is a problem. 14 compartments are not enough for 2 times a day because in a week you will use the 14 compartments and then you will be short of 1 when you want to hang it. Maybe some kind of lock or stopper could be made for the first day, which you could remove when you start. But I have tried many different types and must say that this is one of the best and has the largest compartments for pills.