A holder for bottles of 30mm diameter for the Skadis peg board system 

30mm Round Bottle Holder for Skadis

A set of Milk Cap jars of 50mm Ø:

small - 56mm tall
medium - 83mm tall
large - 109mm tall

**Requires a UK milk cap or similar thread - none of these designs come with lids - they were designed to save throwing away milk carton lids.**

For jars of 40mm Ø (matching the lid diameter), see: https://social.thangs.com/m/483744

The milk cap is a softer plastic so gets a really good snug closure on the print - though I wouldn't expect it to be water-tight
Sculpt by @Mattburt77

Milk Cap Jar (Wide) set

MilkCapJar-Wide-56x50mm.stl

A set of Milk Cap jars of 40mm Ø:

small - 56mm
medium - 83mm
large - 109mm

**Requires a UK milk cap - none of these designs come with lids - they were designed to save throwing away milk carton lids.**

For jars of 40mm Ø (matching the lid diameter), see: https://social.thangs.com/m/791092

The milk cap is a softer plastic so gets a really good snug closure on the print - though I wouldn't expect it to be water-tight

Sculpt by @Mattburt77

Milk Cap Jar set

MilkCapJar-56x40mm.stl

A pillbox based on my Milk Cap Jar containers. This one is super small, with ribs matching the lid for easy opening & closing.

**Requires a UK milk cap** - none of these designs come with lids - they were designed to save throwing away milk carton lids.

The milk cap is a softer plastic so gets a really good snug closure on the print - though I wouldn't expect it to be water-tight


Milk Cap pillbox

A small jar - requiring a UK milk bottle lid - to hold small items.

After getting tired of fiddling around trying to plug micro SD cards into my printer control box, I decided to get an extension cable.

This design holds the business end of the extender, while allowing its quick removal to aid plugging in / removing the micro SD card.

It attaches to printer enclosures via cable tie.

No supports required

**Sculpt by @Mattburt77**

Micro SD Extension holder

After getting tired of fiddling around trying to plug micro SD cards into my printer control box, I decided to get an extension cable.

This design holds the business end of the extender, while allowing its quick removal to aid plugging in / removing the micro SD card.

It attaches to printer enclosures via cable tie.

No supports required

Sculpt by @Mattburt77

A holder for large / wide Scissors for the Skadis peg board system

Created to hold a larger array of scissors than my last design - this holder bulges in the middle to keep the scissors aligned with the peg board.

For a compact Scissor holder, see: https://social.thangs.com/m/323762

No supports required

Requires the Universal Hook by CSD_Salzburg: https://www.thingiverse.com/thing:2853257

Sculpt by @Mattburt77

Large Scissor Holder for Skadis

A small hook for the Skadis peg board system.

No supports required

**Sculpt by @Mattburt77**

Mini Hook for Skadis

3 small cups and a holder for hanging on the Skadis peg system

Cups should be printed in Vase Mode

**Sculpt by @Mattburt77**

Small Cups & Skadis holder

SmallCup360x120Join.stl

A compact holder for Scissors for the Skadis peg board system.

For a larger Scissor holder, see: https://social.thangs.com/m/366975

No supports required

Requires the Universal Hook by CSD_Salzburg:
https://www.thingiverse.com/thing:2853257

**Sculpt by @Mattburt77**

Compact Scissor Holder for Skadis

A holder for Scissors for the Skadis peg board system.

No supports required

Requires the Universal Hook by CSD_Salzburg:
https://www.thingiverse.com/thing:2853257

Sculpt by @Mattburt77

Skadis-Scissor Holder

A deep narrow container for the Skadis peg system. Designed to store 50x75mm post-its.

No supports required

Requires the Universal Hook by CSD_Salzburg:
https://www.thingiverse.com/thing:2853257

**Sculpt by @Mattburt77**

Skadis Post-it Holder

A holder for 2x Nippers for the Skadis peg board system.

No supports required

Requires the Universal Hook by CSD_Salzburg:
https://www.thingiverse.com/thing:2853257

**Sculpt by @Mattburt77**

Skadis 2x Nippers Holder

A holder for 2x Nippers for the Skadis peg board system.

No supports required

Requires the Universal Hook by CSD_Salzburg:
https://www.thingiverse.com/thing:2853257

Sculpt by @Mattburt77

Skadis2NippersHolder.stl

A shallow tray for the Skadis peg board system.

No supports required

Requires the Universal Hook by CSD_Salzburg:
https://www.thingiverse.com/thing:2853257

**Sculpt by @Mattburt77**

Shallow Tray for Skadis peg board (universal peg).stl

A shallow tray for the Skadis peg board system.

Requires the Universal Hook by CSD_Salzburg:
https://www.thingiverse.com/thing:2853257

**Sculpt by @Mattburt77**

Shallow Tray for Skadis peg board (universal peg) v1.stl

Pumpklin with removable lid based on the 1978 Halloween design

A learning excerise using the Loft & Sweep tools in Fusion360

_For use with battery operated lights only_

**Sculpt by @Mattburt77**

Halloween 1978 style Pumpkin

HalloweenMoviePumpkin-Body.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

MattB77

Achievements

Novice Maker

Seedling

Debutant