FPV Noodle Gate.3mf

Noodle Gate for FPV Training

What you need per Gate:

• Pool Noodle
• 20mm Aluminum tube (M20 KIR) 2x 20cm
• Printed Parts: -2x Noodle Cup -2x Groundspike Ring

Tools: -1x Hole Cutter -1x Notch Tool -1x Groundspike Tool

Using the "Hole Cutter", punch a hole in the center of the Noodle, 55mm deep.

Remove the foam core using pliers.

Glue the ‘Noodle Cup’ into the ends of the noodle with hot glue.

Cut the "Ground Spike" at a 45 angle, Grind in the Notches using the "Notch Tool".

Groundspike Tool added to put the spikes in the ground.

Have fun and fly save