Models from Mars-TonFabrication of the Hueforge Type.

Black and White Dragon_01 
By Kimball Marston
© 2025-07 Kimball Marston and Mars-TonFoundries
Visit our Store for Bookmarks at:
Mars-TonFables.com

This is a Hueforge Filament Painting using only two colors. This makes it easy to print for those who don’t have an automatic filament changer. This can be done by adding a pause to the print at layer 9 or if your slicer has a change filament option you can use that. 
Start with a solid black color filament and then at layer 9 (0.8mm) swap to a white colored filament. Preferably one with a high transmission distance rating. 
The Base image is AI generated using my personal image generator. It is then edited and converted into an STL using Hueforge. The HueForge Settings and Filament Painting is done manually using the software.

Print Settings:
 
Nozzle: 0.4mm
Bed Type: Smooth High Temp
(You can use any Bed Type you want just be sure to change it.)
Layer Height: 0.08mm
First Layer: 0.16mm
Wall  Loop: 1
Top Layers: 0
Bottom Layers: 99
Sparse Infill Density: 100%
Sparse Infill Pattern: Rectilinear
Prime Tower Enabled:
   Width: 10mm
   Prime Volume: 10mm³
Brim Width: 3mm
   Brim Type: Mouse ear (Optional)
   Brim Width: 5mm
   Brim-Object gap: 0.1mm
   Brim ear max angle: 125
   Brim ear detection radius: 1mm
These are basic settings I used for all my Hueforge files. 
his is the instructions from HueForge:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 100x100mm in size
 You may print at higher layer heights below the Base Thickness of 0.56mm
 The Max allowed Thickness is 1.76mm and the Actual Thickness is 1.76mm

Filaments Used:
   #000000 PLA+ Sunlu Black  Transmission Distance: 0.6
   #ffffff PLA+ Sunlu White  Transmission Distance: 5
This print uses 2 unique filaments

Swap Instructions:
   Start with Black
   At layer #9 (0.8mm) swap to White for the rest.

Some common white filament with a high transmission distance are as follows: 
   Bambu Lab PLA Basic White: TD=5
   Sunlu PLA Basic White: TD= 7.5
   Creality PLA Basic White: TD= 10.4
   Elegoo PLA Basic White: TD= 5.5
   ESun PLA Basic White: TD= 5
   Polymaker PLA PolyLite White: TD= 5
(These are just some reported TD readings. They can change per roll, brand, mixture, batch and a ton of other factors. But any white should do fine.)
I use Sunlu, Jayo, and TecBears Filaments (These are all produced by Sunlu.)
I also use Polymaker HT-PLA black for our bookmarks and other commercial Hueforge products. I would recommend but it’s not necessary.

Please Comment and Like if you enjoy this type of Prints.
Commercial License will be forth coming so stay tuned.

BW_Dragon_01_Hueforge-MTF

BW_Dragon_01_Hueforge_ECC_Orca-MTF.3mf

Mars-TonFabrication Hueforge Models

I am a 3D Printing and Technology Enthusiast. I enjoy Computers, AI, 3D printing and HomeLabbing.
I hope to produce some great models and am learning as I go.
Please visit our shop on 
[Mars-TonFables.com](https:\\mars-tonfables.com) 
Please let me know if you are interested in Commercial Licenses or have suggestions!

Mars-TonFabrication

Achievements

Seedling

Explorer

Mars-TonFabrication Hueforge Models

BW_Dragon_01_Hueforge-MTF