XTool D1 Laser 80mm Fan Adapter - Makeblock Laser Cutter Upgrade

Practical Printed Parts!

Recently I started using the Makeblock XTool D1 Laser Cutter and found the stock 50mm fan was too loud for my taste. When I went to inspect the fan for replacement... I broke it. So in comes this design!

This is an adapter duct to mount an 80mm fan in place of the stock 50mm fan. It was specifically designed to work with the XTool D1 Laser Cutter, but may work in other applications. The side of the duct has a place for the Laser End wiring harness to be zip tied in place. This makes it more secure and supported than stock as well as picking it up and away from the cutters path better. I also included a Fan Grille that features the same logo design as the stock metal fan grille so you can maintain that look.

Check out the Full YouTube video showing the installation of this part: https://youtu.be/YNJcM2ijKmM

The factory 50mm Fan is a 12v fan that draws .2A. I replaced mine with an 80mm Noctua Redux fan that draws just 0.06A. So it is a lower power draw as well as flowing more air AND being quieter!

Assembly uses the original Fan mounting screws to attach the Adapter to the Laser Head. To mount the 80mm Fan you will need four 3mm x 25mm screws.

• Necessary Parts (Affiliate Links):
  • 80mm Noctua Fan: https://amzn.to/32fj0o5
  • M3 Screws: https://amzn.to/3yXDjBY

• INCLUDED FILES:
  • CAD STEP File to learn how I designed these.
  • 80mm to 50mm Fan Duct
  • 80mm Fan Grille

• PRINT PARAMETERS:
  • No Supports Required
  • 3 Perimeters Recommended (Thread holes)
  • 10%+ Infill (I used Rectilinear)

Mine were printed in GreenGate3D "American Blue"

Want to Support what I do? Check out my social medias please!

Link Tree: http://www.HotRodHippie.com/links

All of my Designs are covered by a Creative Commons Non-Commercial LIcense. Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality. Unauthorized sales will result in new designs not being made public.

PLEASE Credit any and all Remixes of my designs: MandicReally