Voron Hex Mid Panel - Accent your 0.2!

Hexagons are the Bestagons!

Add a little more Accent to your Voron 0.2 build with this Hex covered Mid Panel replacement! You can also add some functionality as this has a Chamber Thermistor mount near the print level of the machine (optional files). Along with brand logo versions for LDO Motors & Fysetc to fit your build.

NO Multi-Color Hardware Required! Just pause at .6mm & 2.2mm and swap colors!

Heavily inspired by the design by Zen3D, but entirely made from scratch. See the original here: https://www.teamfdm.com/files/file/152-v0-midpanel-hexpattern/

Note: Should fit Voron 0.1, but was designed with 0.2 Z-Chain location in mind.

Parts Needed (Affiliate Links):

• NTC100K Thermistor
• Polymaker Filament
• M3 Hardware

Files Included:

• Hex Mid Panel STEP File
• Hex Mid Panel STL
• Hex Mid Panel LDO STL
• Hex Mid Panel Fysetc STL
• Hex Mid Panel w/ Thermistor Port STL
• Hex Mid Panel Therm. LDO STL
• Hex Mid Panel Therm. Fysetc STL

Recommended Print Settings:

• 4 Perimeters
• 40% Infill
• No Supports Required (Hexes should Bridge fine without supports.)
• ABS or ASA Filament recommended.
• Pause at .6mm Layer Height & Swap to Accent Color
• Pause again at 2.2mm Layer Height & Swap to Base Color

Want to Support what I do? Check out my social medias please!

Link Tree: http://www.MandicReally.com/links

Design covered by GPL3 Open Source License.

Please consider support on Patreon today: https://www.Patreon.com/MandicReally