Row Row Row Your Sub-10 Minute Benchy...
Recently I modified my printer into my ULTIMATE Bambu X1 in this video: https://www.youtube.com/watch?v=AppUVvf-UGg
In my testing and pushing the machine harder I've gotten it to print Sub-10 Minute Benchys reliably. The overall print quality isn't as good as the SD-card print that ships with the machine but they are over 30% faster. All while conforming to the “Speed Boat Benchy” rules. This listing is the 3MF file of that project, showing you all the settings I've used to achieve this result. This particular one produced a 9 Minute and 51 Second result. I've gone significantly faster but faster than this degrades quality further.
This 3MF file is provided for Educational Purposes ONLY. It is EXPERIMENTAL and I DO NOT Recommend running this print on your machine. It is provided solely so you can see the Slicer settings I've used to achieve these speeds and maybe learn some tricks to improve your own print speeds & settings. Use the information provided AT YOUR OWN RISK! Also, this profile was sliced for Polymaker ASA filament at 255/250C. It is entirely untested on other materials.
NOTE: The 3D Benchy is the intellectual property of “Creative Tools” and I make NO claims of ownership over it. It is provided unmodified purely as a vehicle to present this information to you and under the same licensing as required by the original.
Parts Used (Affiliate Links):
Files Included:
- 3MF File of Sub-10 Minute 3D Benchy
Recommended Print Settings:
- 3 Perimeters
- 20% Infill
- No Supports Required
- ABS/ASA Filament recommeneded.
Want to Support what I do? Check out my social medias please!
Link Tree: http://www.MandicReally.com/linksDesigns covered by a Creative Commons Non-Commercial Share-Alike License. Commercial resale is never authorized without written permission. Want to become an Authorized Reseller? Become a Patron on the “Merchant” Tier on my Patreon to begin selling today: https://www.Patreon.com/MandicReally