Sun Wall Art - Uses Reflection Stand System Inserts

This Sun Wall art is a Massive 370mm across without scaling! Print the parts and insert the fins into the main body of the print. Then you can use any of the Reflection Stand System inserts for your own look and feel. You can even create your own inserts! Uses a 5" Mirror, or you can also 3D Print a plastic mirror with the stand core if you want a solid color backing instead.

The example here is using the Mythosaur insert. All of the pieces will take about 6 hours if you print multiple fins at the same time. 10 of them will fit on an 180x180 print bed. No infill is required. 3 walls recommended with .2 layer height or smaller.

If you would like to request an insert design, leg design, etc. you can do that through my community discord channel https://discord.gg/ZDKq5N2.

When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.

Was this model helpful for you? Consider supporting my work in any of the following ways! Even the free options help the channel!

Consider dropping a tip http://buymeacoffee.com/MakersMashup or consider supporting my ongoing work https://www.patreon.com/makersmashup Purchase anything on amazon after visiting our store page https://amzn.to/429HusI Just click this link first!

No cost option to support my work?

• Subscribe to the YT channel
• Follow me on Thangs.com
• Watch videos on the channel!
• Share any of the videos on social media!
• Share my models with friends and family!