This Mrs. Mouse charger is a realistic mouse silhouette with a pink bow with a face that will charge your phone!
2 parts to print, the cover requires supports. I personally recommend a .3 mm clearance at the support and 2mm from the body. .16 layer height has the best results.
3MF Prepaited included for bambu users.
This model is IP safe and does not use any intellectual property from Disney. While this is a free model, prints can not be sold with a Thangs subscription.
🔗 Additional Information
You will need to purchase one of these round style qi charging modules. They are available on amazon, aliexpres and the like. The shape of this is very common which is why I chose it vs other ones available. https://amzn.to/4aJ2E54 is the referral link to the product which also helps support my free model development.
When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.