Kingroon KPS3 Spool Mount

This spool mount comes in two versions. Single piece (you'll need to print on another printer) or multiple pieces that prints on a KPS3 and you'll need to screw it together. M3 screws are used for assembly (I also recommend some glue). M5 and T-Nuts are used to attached to the top of the KPS3.

This spool holder aims to put the weight of the spool directly down so it does not cause vibrations when printing. I've been using this since I got the printer and works very well.

PRINTING: If printing the AIO mount print the top against the build plate. No Supports are necessary.

When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.

Was this model helpful for you? Consider supporting my work in any of the following ways! Even the free options help the channel!

Consider dropping a tip http://buymeacoffee.com/MakersMashup or consider supporting my ongoing work https://www.patreon.com/makersmashup Purchase anything on amazon after visiting our store page https://amzn.to/429HusI Just click this link first!

No cost option to support my work?

• Subscribe to the YT channel
• Follow me on Thangs.com
• Watch videos on the channel!
• Share any of the videos on social media!
• Share my models with friends and family!