tracking pixel
M

Planter Tower Vase Mode !!!

by
Maker81
Follow
Follow
Remix Model
M
Maker81
|
Image 1 of 5
Planter Tower Vase Mode !!! 3d model
M
Maker81
|
Image 1 of 5
Planter Tower Vase Mode !!! 3d model
2D
3D
Makes
Planter Tower Vase Mode !!! 3d model
Planter Tower Vase Mode !!! 3d model
Planter Tower Vase Mode !!! 3d model
Planter Tower Vase Mode !!! 3d model
Planter Tower Vase Mode !!! 3d model
This model is restricted by licensing terms. 

Planter Tower - Vase mode spiralize If you like it --> press like it :-)

I´ve designed a planter for e.g. succulents, sempervivum,maybe strawberries with different designs (round and swing) and flat plant coaster.

Additional a variant with some spiral effect and the same with smaller diameter and two flat plant coaster to the small version.

Also there is a version for wall mount on a screw, but it´s currently not tested - but slicing worked and looked good. There are no holes in the model that you can add some by yourself or drill/melt some in where you need one. Screw diameter max. 4mm / head diameter max. 12mm / distance of the flat screw area around 10mm from the wall. Added a version with reduced height, so that you have at the top a bigger area for plants.

It´s made for vase mode and therefore a good demonstrator, what a 3D printer can do in a short time period. The Planter Tower from the pictures(planter_round.stl) is printed in PETG with a 1,0mm Nozzle, 0,2mm height for the first layer and the than 0,5mm layer height (three bottom layer →1,2mm). It took me on my old printer 3h40 for the print with 25mm/s and total height of 205mm! The bridges are around 57mm.

Would be happy to see your makes!


9 Likes26 DownloadsNovember 8, 2024


9 Likes26 DownloadsNovember 8, 2024
This model is restricted by licensing terms.