Flexi-Conda and Brick-Flexi-Conda
If you like it --> press like it :-)
Remix of my own Brick-Flexi-Gator model. https://www.printables.com/de/model/129852-brick-flexi-gator-and-flexi-gator-m81-remix
The brick studs have an diameter of 4.9mm and at the head 4.8mm. There is a fast test file to check how the bricks fit.
Works Print in Place and bricks will fit without force.
It is compatible with bricks from LEGO or similar.
The length is 220mm - the print time is arround 4h with 60mm/s - the material use arround 10m.
Recommendation: Supports: No Resolution: 0,2 Infill: 10 % Gyroid Walls: 3 Top/Bottom: 5 Layers Printed: PETG/PLA
New head available !!! You can see it on the second picture in black, red and yellow. The teeth are deleted and the contour at the eyes is changed. Also there are two holes for the nose.