tracking pixel
M

Flexi-Conda and Brick-Flexi-Conda !!! NEW HEAD AVAILABLE !!!

by
Maker81
Follow
Follow
Remix Model
M
Maker81
|
Image 1 of 3
Flexi-Conda and Brick-Flexi-Conda !!! NEW HEAD AVAILABLE !!! 3d model
M
Maker81
|
Image 1 of 3
Flexi-Conda and Brick-Flexi-Conda !!! NEW HEAD AVAILABLE !!! 3d model
2D
3D
Makes
Flexi-Conda and Brick-Flexi-Conda !!! NEW HEAD AVAILABLE !!! 3d model
Flexi-Conda and Brick-Flexi-Conda !!! NEW HEAD AVAILABLE !!! 3d model
Flexi-Conda and Brick-Flexi-Conda !!! NEW HEAD AVAILABLE !!! 3d model
This model is restricted by licensing terms. 

Flexi-Conda and Brick-Flexi-Conda

If you like it --> press like it :-)

Remix of my own Brick-Flexi-Gator model. https://www.printables.com/de/model/129852-brick-flexi-gator-and-flexi-gator-m81-remix

The brick studs have an diameter of 4.9mm and at the head 4.8mm. There is a fast test file to check how the bricks fit.

Works Print in Place and bricks will fit without force.

It is compatible with bricks from LEGO or similar.

The length is 220mm - the print time is arround 4h with 60mm/s - the material use arround 10m.

Recommendation: Supports: No Resolution: 0,2 Infill: 10 % Gyroid Walls: 3 Top/Bottom: 5 Layers Printed: PETG/PLA

New head available !!! You can see it on the second picture in black, red and yellow. The teeth are deleted and the contour at the eyes is changed. Also there are two holes for the nose.


31 Likes103 DownloadsAugust 9, 2024



31 Likes103 DownloadsAugust 9, 2024
This model is restricted by licensing terms.