tracking pixel
Devin B

PLEIADES Desktop Waste Bin

by
Make Anything
Follow
Follow
Remix Model
Make Anything
Make Anything
|
Image 6 of 10
PLEIADES Desktop Waste Bin 3d model
Make Anything
Make Anything
|
Image 6 of 10
PLEIADES Desktop Waste Bin 3d model
2D
3D
Makes
PLEIADES Desktop Waste Bin 3d model
PLEIADES Desktop Waste Bin 3d model
PLEIADES Desktop Waste Bin 3d model
PLEIADES Desktop Waste Bin 3d model
PLEIADES Desktop Waste Bin 3d model
PLEIADES Desktop Waste Bin 3d model
PLEIADES Desktop Waste Bin 3d model
PLEIADES Desktop Waste Bin 3d model
PLEIADES Desktop Waste Bin 3d model
PLEIADES Desktop Waste Bin 3d model
This model is restricted by licensing terms. 

Keep your space clean and stylish with this small desktop waste bin. This three part design utilizes a lightweight spiralized bin along with an outer rim that can hold a plastic liner, and a lid with a print in place hinge that keeps your trash out of sight, out of mind.


My PLEIADES series of prints are designed to be printed in vase/spiral mode in your slicer. I suggest printing the 'bin' part with a 0.8 mm nozzle width (even with a 0.4mm nozzle) and 3-5 bottom layers. No top layers. Make sure your slicer is not set to close small gaps. In BambuStudio I set the 'Slice gap closing radius' to 0 mm

The lid and outer rim can be printed with 3+ shells and 15-25% infill at 0.16-0.2 mm layer height. Depending on the filament and infill% you may want to increase the number of solid top layers on the lid to 6 or 7 for a smooth surface.

I designed this small bin to fit used bread packaging for the plastic liner, but any small plastic bag should do. It may also be used without a liner if you only plan on using it for dry waste.


Photographed models were printed on the Bambu Lab X1-Carbon 3D Printer using Bambu Lab PETG-CF filament.* *These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!


33 Likes34 DownloadsFebruary 20, 2024


33 Likes34 DownloadsFebruary 20, 2024
This model is restricted by licensing terms.