Cupid's Bubbles [Premium] // Valentine's Day Bubble Wands [Heart + Kiss]

Blow a kiss with these lovely little bubble wands! This comprehensive kit comes with 3 different wands, and several variations of the bottle for single and multicolor printing. Based on a competition winning design I came up with way back in 2014, and have now recreated and improved.

Included files:

• Bottle Multicolor A & B - Multicolor design with 'Love is in the Air' graphic
• Bottle Plain - Simple bottle without graphics
• Bottle Single Color Graphic - Embossed 'Love is in the Air' graphic for single color printing
• Bottle Vase Mode - Vase mode version of the plain bottle, which may provide a cleaner and quicker print on certain machines.
• Lid Heart No Seal - Bottle lid with a debossed heart graphic that can be printed with a single color printer. Optionally, do a color swap after the first 2 layers to achieve a two color graphic. The 'no seal' version of the lid is designed to work without the TPU seal. A clean print will still be watertight, but may require a bit more tightening.
• Lid Heart - Bottle lid with a debossed heart graphic that can be printed with a single color printer. Optionally, do a color swap after the first 2 layers to achieve a two color graphic. This version holds the TPU Seal insert for a more effective watertight seal.
• Lid Multicolor A & B - Multicolor version of the heart graphic on the lid. There are versions of part A for use with or without the TPU Seal.
• Lid Plain No Seal - A blank lid for simple printing. The 'no seal' version of the lid is designed to work without the TPU seal. A clean print will still be watertight, but may require a bit more tightening.
• Lid Plain - A blank lid for simple printing. This version holds the TPU Seal insert for a more effective watertight seal.
• TPU Seal - A round insert that fits into the inside bottom of the Lid for a more effective watertight seal.
• Wand Heart - A bubble wand with Cupid's arrow piercing a heart
• Wand Kiss Small - A smaller version of the kissing lips bubble wand
• Wand Kiss - A bubble wand shaped like luscious kissing lips. How silly!

**Bubble solution not included... I'm still figuring out how to print that!

Printing Guidelines

• Bottle - Print solid (except Vase Mode version). A well tuned printer will produce a watertight bottle using default settings. If your bottle is not watertight, you can increase the 'flow ratio' or 'extrusion multiplier' by 1-2%. If you're printing a version with the graphic, I suggest 0.12mm layer height to capture the tiny details. Otherwise any standard layer height should be fine.
• Lid - Default print settings. Print solid.
• TPU Seal - Default print settings for TPU. Print solid.
• Wand - Default print settings. Print solid.

Photographed models were printed on the Bambu Lab X1-Carbon 3D Printer using Bambu Lab PC (clear), PLA(marble white) and PETG(red) filaments.* *These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!