Originally designed for holding utensils, but can be used as a container of other sorts, or a pot, or whatever else!
The colour changes shown can be done using AMS or with a manual filament change with pauses at the appropriate layers. This is easy to set up in the slicer and there are good tutorials available if needed. If you decide to repaint the coloured bands in the slicer for multicolour printing, keep in mind that you will likely need to paint both the inside and outside faces due to the thin wall. The model is made so that it is easily done with the bucket tool. A 3mf file is included with a single colour and multi colour version.
Also included is a slimmer version. My printed version (pictured) turned out a little wider than I expected once I saw it, so I made an alternate model to accompany. You can choose whichever best fits what you like, or scale as needed.
The dimensions of the original are 170mm diameter at the base, 130mm diameter at the top opening, and 163mm high. The slim version has a 150mm base, 110mm top, and same height.