15 Likes227 DownloadsJuly 12, 2021
This case is designed for a Raspberry Pi 3B+. It has preparations for holding a 40x40x10 Noctua fan.
The case can be printed in PLA / PLA+ / PETG / ABA etc.
It was printed with the following settings:
- Layer height: 0.20mm
- Infill: 20%
- Support: nN
- Printing plate adhesion type: Brim / Skirt
If you like what you see, please leave a Like <3!
Category:
15 Likes227 DownloadsJuly 12, 2021
15 Likes227 DownloadsJuly 12, 2021