Allows storage of rockets with 18mm motor mounts to be affixed to the wall, rather than taking up desk space.

I printed using 0.2 at 15% infill settings using standard PLA.  

18mm Rocket Wall Mounting Plate.stl

This is a sanding block for a 3" tube -- in my case used for 3" model rocket tubes.   After filling the cardboard tube rings with filler, or high-build primer, this will sand everything evenly.   Much better job than using a flat surface.  

3 Inch Diameter Tube Sander

Title: ST-20 Tube Sanding Block 3D model

Description: This is a 3D model of Estes ST-20 Tube Sanding Block. It is used for sanding ST-20 sized rocket tubes after filling the tube rings or priming, allowing you to achieve a smooth and consistent finish with ease. No fancy clamps to hold the paper.   Just drape your sandpaper over the tool, and hold with your hand while you sand.   This does a great job of creating an even sanding surface, rather than using any kind of flat block.

Remix of: https://www.thingiverse.com/thing:3485413


ST-20 Tube Sanding Block

Title: ST-20 Tube Sanding Block 3D model

Description: This is a 3D model of Estes ST-20 Tube Sanding Block. It is used for sanding ST-20 sized rocket tubes after filling the tube rings or priming, allowing you to achieve a smooth and consistent finish with ease. No fancy clamps to hold the paper.   Just drape your sandpaper over the tool, and hold with your hand while you sand.   This does a great job of creating an even sanding surface, rather than using any kind of flat block.

ST-20 Tube Sanding Block.stl

This 3D model is a designed for a Go Pro camera to be mounted to a 2" Inch Receiver Hitch. It's a perfect accessory for all Go Pro users who love recording their adventures on the go whether it be cruising on a highway or off-roading in the wilderness. The model showcases a sturdy construction and quick slide-out removal that ensures your action camera is securely attached yet easily removed. It fits into a standard 2-inch receiver, making it a universally applicable accessory for a wide variety of vehicles.

Remix of https://www.thingiverse.com/thing:4642094 and https://www.thingiverse.com/thing:2481192

Would use PETG or other heat/UV resistant filament for this as outdoor sun/heat will be an issue.

Go Pro 2 Inch Receiver Hitch Mount

This 3D model is a designed fir a Go Pro 2 to be mounted to a 2" Inch Receiver Hitch. It's a perfect accessory for all Go Pro users who love recording their adventures on the go whether it be cruising on a highway or off-roading in the wilderness. The model showcases a sturdy construction and quick slide-out removal that ensures your action camera is securely attached yet easily removed. It fits into a standard 2-inch receiver, making it a universally applicable accessory for a wide variety of vehicles.

Remix of https://www.thingiverse.com/thing:4642094 and https://www.thingiverse.com/thing:2481192

Go Pro 2 Inch Receiver Hitch Mount (1).stl

Made a drawer pull out of a modern Dodge Challenger silhouette.   This was a remix and rescale of the Dodge Challenger keychain by 
https://www.thingiverse.com/thing:2958001.  

Standoffs are pre-threaded for US standard 8-32 UNC standard drawer screw.  But anything close with a big bite will work.

Challenger Drawer Pull

A "similar" look and feel to the Piper PA-28 rudder pedal.   Replaces the upper pedal assembly for the Saitek rudder pedal system. 

Piper Rudder Pedal for Saitek

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

MNTrailBoss

Achievements