Use these brackets to securely slot your Steam Deck into the Ikea Skådis pegboard system. 

For a few reasons mentioned in my [Secure Clip System template](https://www.printables.com/model/207811-ikea-skadis-secure-clip-system-template) I opted to design this method for securely locking things (such as my precious Steam Deck) to the peg boards so that my kids or cats wouldn't carelessly knock them down.

 
**Options:**

I've included two interchangeable designs. Version A is a bit over-designed because I like truss's and version B is more restrained and flowing. You will need to also print out the 4 clips.
 
**Print Instructions:**

There are a few overhangs that benefit from supports which i've baked into the gcode. You will need 4 of the clips which I print with 3-4 shells since they are the load bearing part of the assembly.

 Skådis - Steam Deck Holder 

Skadis - Steam Deck v1A.3mf

Skadis Clip RC1 x4.3mf

This wall hook is compatible with piece 67139 which is used as a hanger bracket by LEGO's line of dot mosaic art sets.


**Hanger Hook**
I printed these standing up on their bottom end with a raft just to be on the safe side. 

This hanger accommodates medium sized command strips (19 x 52.4mm / ¾ x 2in)
 

**Spacer Version**
This version lets you slot two hooks onto a connecting beam into a single pre-spaced assembly. This is what I have opted to use for my 4 prints as it made spacing out and leveling my frames a lot easier than trying to independently place 8 hooks. 

I do not know how this spacer would work with the world map set, but should be compatible with any 3 tile (48 stud) wide sets by placing the hanging brackets in slightly from the corners. (see attached image) The spacer will print just fine at a 45 degree angle on a Prusa MINI.

I applied a thin layer of super glue and let the puzzle piece connections dry before attaching the command strips.

LEGO Art Set Hanger

LEGO Art Set Hanger (Connected)

This is the stand-alone hanger piece that interfaces with the lego bracket. Use with medium sized command strips. not compatible with the spacer rod.

LEGO_Art_Hanger.3mf

This spacer bar connects two hangers together at the proper spacing to aid in level hanging of the art set.

LEGO_Art_Connecting_Spacer.3mf

This print was my attempt at creating a laptop stand that looked elegant, wasn't over engineered and could be expanded upon in the future if needed. With my kids returning to mixed remote and on-site learning i gave them my laptop stand for their ipads and decided to take a crack at creating a super flexible and simple version that could be used for both laptops and tablets.

The slotting leg+frame system lets you adjust between roughly 25°,  35° and 45° based on your needs and device (using the default “long” foot).

The short foot is for getting more dramatic angles out of smaller devices like tablets but I have not yet printed it.

I printed these on their side without top and bottom shells as a way to quickly prototype and was surprised with how rigid they were using a honeycomb infill. As printed the stand can securely hold many times the weight of my MacBook Pro without issue. Feel free to cap them off or change the infill as needed.

They are currently 30mm thick which seems like a good starting point for stability. 

The slot clearance between the foot and the frame is 0.1mm.

 

** This print was heavily inspired by "T-RexCookie's 2 Part adjustable laptop stand" **

 

Future features I want to look into:

- some simple and scalable way to attach the sections together
- a multi-stepped leg that can handle multiple angles with a single print
- a captive slot design improve how the feet attach to the frame.

#DIY

 3-Way Adjustable Stand

Stand Frame.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

MKingery

Achievements

Seedling

Debutant

Skådis - Steam Deck Holder

LEGO Art Set Hanger

3-Way Adjustable Stand