Newest version on my website.

===> THIS STL IS FOR PLA <=== If you want to print it in ABS (which I would recommend because of its higher temperature resistance) you need to scale it by 101.6% in your slicer because it will shrink as it cools down.

Tolerances are VERY tight so to close your key I would recommend using a vice.

The casing is designed to be used with M2x8mm screws.

This model should be compatible with keys from all Foresters from 2009 to 2013 (untested).

Known flaws: Screw hole is slightly misaligned (just the clips should be able to keep your key closed).