This is an improved version of my initial design.
Now it has the women touch. I listened all the feedback from my wife and updated the design.

I have 2 versions uploaded:
- LipStickHolder_200x100x40(h) → You are on this page now. The one on the photo is the 60mm tall version.
- LipStickHolder_200x100x60(h)

Now it is:
- Ikea drawer friendly. 200mm x 100mm dimensions will let you print many of them and place in Ikea drawers in any orientation you want.
- New dimension will let you to use the whole space as effective as possible.
- Quicker to print. There was no point of having thick walls for inner separators. Apologies for my initial design. Now the separator walls have enough thickness to last and function. I made them thinner thus this version is now:
- Filament effective
    - Quicker to print
    - Aesthetically better
    - Less filament, smaller cost. ;)

LipStickHolder_200x100x40(h).stl

Monitor stand legs for 2 pieces of 26 x 90 lumbers.
Dimensions can be seen in pictures.

Heavy Duty Monitor Stand

Monitor Stand.stl

Meet PegMan! :)
Simple but super effective tent staking helper. No more hammering. No more wounds in the palms.

Peg Man.stl

Better and sturdy washer for the headlight protector hinges 

BMW R1250GS/GSA Headlight Protector Washer

GSA Headlight Protector Washer.stl

**DESCRIPTION:**
This is an adapter to install saddle tube rear lights on the rear racks.
I designed this adapter for "Decathlon Elops 500” rear rack but connection points are usually universal. 
Adapter is tapered to mimic the similar angle of the seat posts so that your rear light will be in the correct angle.
No screws needed! Just 4 cable ties! (Not wider than 3.5 mm)

**PRINTING**
Please print the model as imported to your slicing software. (with rack facing surface on the heated bed.)
I printed mine with:
- 0.2 mm print quality
- %15 Gyroid infill
- No supports
- No rafts or brims


Bicycle Rear Rack Light Adapter

**DESCRIPTION:**
This is an adapter to install saddle tube rear lights on the rear racks.
I designed this adapter for "Decathlon Elops 500 rear" rack but connection points are usually universal. 
Adapter is tapered to mimic the similar angle of the seat posts so that your rear light will be in the correct angle.
No screws needed! Just 4 cable ties! (Not wider than 3.5 mm)

**PRINTING**
Please print the model as imported to your slicing software. (with rack facing surface on the heated bed.)
I printed mine with:
- 0.2 mm print quality
- %15 Gyroid infill
- No supports
- No rafts or brims


Simple yet effective lipstick holder for your partner.

Lip Stick Holder

This is the replacement propeller for the Xiaomi Xiaowan Smart Pet Feeder.
Print with upper side on the bed (the same orientation seen in the photo) without any supports.

 Xiaomi Xiaowan Smart Pet Feeder Propeller

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

MADDIVER

Achievements

Seedling

Explorer

Novice Maker