We brought together 3 of our timeless pendant lamps: Clara, Josefina and Marina. These 3 models are usually downloaded together since they pair beautifully thanks to their patterns. And of course, all 3 feature our RippleMesh texture.

Note: Josefina is part of our Adaptive lamp series, which can work both as a pendant and a table lamp.

What's included • Clara, Josefina and Marina Pendant Lamp with our signature RippleMesh texture • A step-by-step instruction file to help you replicate the result shown in the photos

Model dimensions Based on how the model is positioned on the print bed

CLARA LAMP • X: 200.98 / Y: 200.98 / Z: 136.2

JOSEFINA LAMP • X: 193.37 / Y: 186.20 / Z: 245.40

MARINA LAMP • X: 245.39 / Y: 245.39 / Z: 167.40

Recommended slicers • Bambu Studio or PrusaSlicer

What you'll need to print • 0.4 mm or 0.8 mm nozzle • PLA or PETG

What you'll need to assemble • E27 screw socket with two nuts — see photos for reference • We recommend watching the assembly video included in this listing

Safety note • If you’re using PLA, the bulb must be a low-consumption LED. We also recommend this type of bulb if you’re using PETG • Always turn off the power before any installation

Related products Clara | Josefina | Marina